Wire Lines In Oil & Gas Production
Moving tools and equipment up and down the casing is important for locating and repairing problems in the well, as well as monitoring conditions downhole. When tools need to be run in the well, or the
Read more →Production insights, field guides, and operator wisdom from the team that built the fastest-growing app in the oil patch.
Moving tools and equipment up and down the casing is important for locating and repairing problems in the well, as well as monitoring conditions downhole. When tools need to be run in the well, or the
Read more →Fluid is pushed up out of the formation and to the wellhead by a number of possible sources; the pressure from the formation may be enough to do it, or artificial lift may need to be used. Whatever pr
Read more →Wells may flow naturally when they are first completed, but at some point a pump will be added to aid in production. That pump can be of a few different types, but the most common variety is going to
Read more →All wells will need to be serviced at some point, either for maintenance or because there’s been a drop in production. To properly service a well, it’s necessary to have a broad understanding of the w
Read more →Preventing corrosion damage can extend the life of equipment and increase the efficiency of operations. While some corrosion may be inevitable, a whole range of techniques and materials have been deve
Read more →The third stage of enhanced recovery from an oil and gas production well begins when after pressure maintenance and water flood operations have already been in place. The addition of a second force fo
Read more →There are three general stages of recovering oil and gas from a well. The first begins as soon as the well is completed, and can include wells that flow naturally as well as those that use some form o
Read more →Wells have three basic stages of production, the first or primary stage, the secondary stage, and the tertiary stage. Each stage is distinguished by the type and variety of recovery methods used. The
Read more →Scale and corrosion can be a major cause of equipment failure and other problems. Reducing and controlling corrosion is, in many cases, one of the primary ways you’ll be spending your time around an o
Read more →In any oil and gas production operation, the goal is to recover as much oil as possible while keeping operating costs as low as possible. As technology has advanced and the the demand for oil has incr
Read more →