Published 2026-11-16 · Updated 2026-11-16
Short answer: Innotek, Inc. sells OverWatch, a cellular controller that watches tanks and runs pump timers on stripper wells, plus a web dashboard called Encompass. If you need to start, stop or retime a pump from your phone, it does a job TinyPumper does not do. If you need to watch tanks, pressures and engine runtime on a lease with no power, and you want your own team to install it in 8 minutes with no wiring, TinyPumper is the whole-site monitor built for that. Its readings also land in Greasebook next to your pumper’s daily gauges.
Picture a 5-barrel well an hour past the last paved road. The compressor quits at 1 a.m., the water tank keeps climbing, and the pumper is not due until tomorrow. The question is not which brand has the nicest box. It is what you need to see, and what you need to touch.
Is Innotek or TinyPumper the Better Fit for My Stripper Wells?
It depends on what you need the box to do. If you want to start, stop or retime a pump from your phone, Innotek’s OverWatch controllers do that and TinyPumper does not; Innotek is the better pick there. If you want tanks, pressures and engine runtime watched with no wiring and no power on site, TinyPumper fits, at $349 a sensor for one-time setup plus one flat monthly rate per site, as of November 2026. If you need full control of a big instrumented facility, neither fits; you want SCADA.
What Is Innotek, Inc.? (Not the Dog Collar, Not LG Innotek)
Innotek, Inc. is a US maker of low-cost remote monitoring and control gear for small, rural sites. Its OverWatch controllers combine a pump timer, motor control and a tank level monitor in one cellular box, and its Encompass portal shows live readings, history and alarms. Stripper well operators are a main market. The company also sells into rural water systems, irrigation and radio towers, so oil and gas is one line of business among several.
The name trips people up. Most of what Google returns for “Innotek” is the PetSafe and Innotek dog collar brand. LG Innotek is an electronics parts maker in the LG family. InnoTek Ltd is a separate company listed on the Singapore Exchange. None of them are the oilfield Innotek. This page is about Innotek, Inc. and its OverWatch line.
What Innotek OverWatch Does Well on Stripper Leases
Credit where it is due. Innotek built for the right buyer:
- It is priced for marginal wells. Innotek pitches itself against SCADA projects that never pencil on low-volume wells, which is the right fight to pick.
- It controls, not just watches. OverWatch can run a pump on a timer and switch the motor remotely, which saves a drive when a well needs its cycle changed. Innotek lists pump control installs on wells making 1 to 20 barrels a day (Innotek installs page, accessed July 2026).
- It reports fast. Readings and alarms can go out as often as every minute (Digi customer story on Innotek, accessed July 2026).
- It keeps history. Encompass holds up to two years of readings for trend review (Innotek Encompass dashboard page, accessed July 2026).
- It covers odd jobs. Innotek shows installs on compressors, chemical tanks and LACT units, including an alert when a LACT goes into bypass (Innotek installs page, accessed July 2026).
If remote pump control on a handful of wells is the whole reason you are shopping, that is a real strength.
Where an Innotek Controller Asks More of Your Crew
A controller that switches motors has to be wired to the motor. OverWatch is sold as a box with motor controls, a timer and inputs and outputs, so most installs mean landing wires, mapping inputs and setting thresholds. Innotek’s public pages do not publish an install time, a sensor list or a step-by-step setup, and its OverWatch-IO page still shows few specs (Innotek site, accessed July 2026).
The published prices are a floor, not a total. A complete system starts at $1,000 (trade show exhibitor listing, October 2024), and the Basic-Plan for data, dashboard and alerts is $365 a year (Innotek OverWatch-WM page, dated 2022). Using those two published numbers, ten sites start at $10,000 up front and $3,650 a year (exhibitor listing, October 2024, and OverWatch-WM page, 2022), before sensors, solar and install labor, which Innotek does not publish.
Encompass is also one more screen. If your production records live somewhere else, the telemetry sits in its own silo unless someone ties the two together, and Innotek’s public pages do not mention an integration.
How Does TinyPumper Compare to Innotek OverWatch?
| Innotek OverWatch | TinyPumper | |
|---|---|---|
| What it is | Cellular controller with pump timer, motor control and tank monitor (Innotek site, accessed July 2026) | Wireless whole-site monitor with a solar gateway and Bluetooth sensors |
| What it watches | Tank levels, plus compressor and LACT points on custom installs (Innotek installs page, accessed July 2026) | Tank levels, wellhead, flowline and injection pressure, engine or compressor runtime |
| Remote pump control | Yes | No. It watches; it does not control |
| Install | Not published; motor control and I/O need wiring | Your team self-installs in 8 minutes, no electrician, no trenching |
| Coverage | LTE-M and NB-IoT modem (Digi customer story, accessed July 2026) | 100% continental US coverage because we use satellite |
| Alert speed | As often as every minute (Digi customer story, accessed July 2026) | Thresholds checked every 5 minutes, alert goes out right away |
| Pricing | System from $1,000 (exhibitor listing, October 2024); Basic-Plan $365 a year (OverWatch-WM page, 2022) | $349 a sensor, one-time setup, then one flat rate a month per site, unlimited sensors |
| Production records | Readings and trends in Encompass | Readings flow into Greasebook beside your pumper’s gauges |
| If it breaks | Ask the vendor | Lifetime hardware replacement |
| Trial | Ask the vendor | 60-day money-back, we pay return shipping |
Where the Innotek column says “not published” or “ask the vendor,” its public site does not say. Ask Innotek directly before you sign.
The Amateur vs. the Pro on an Innotek Quote
| The amateur… | The pro… |
|---|---|
| Buys a controller because the brochure says “monitoring” | Writes down what must be watched and what must be controlled before calling any vendor |
| Treats Innotek’s “starts at” price as the whole bill | Asks for sensors, solar, enclosure and install labor in writing |
| Picks the box with the fastest reporting interval | Asks how fast an alarm reaches his phone once a threshold is crossed |
| Adds a second dashboard nobody opens after week two | Puts sensor readings on the same screen as the pumper’s daily gauges |
What to Avoid When Replacing Innotek OverWatch
- Don’t pay for control you will not use. If nobody has retimed a pump remotely in a year, you are paying for wiring and relays to watch a tank.
- Don’t assume one box covers the whole lease. Ask which sensors come with the quote for pressure and runtime, not just the tank.
- Don’t run two systems of record. Monitoring in one portal and production in another means somebody keys numbers twice.
- Don’t skip the trial. TinyPumper comes with a 60-day money-back guarantee, and we pay the return shipping. Get any vendor’s terms in writing.
What Innotek’s Encompass Dashboard Does Not Show
A sensor on the tank battery does not cover the well three miles down the road. Most producers put TinyPumper on their best producers or their hardest-to-reach sites, and every other well still gets a pumper visit. If that pumper writes gauges on paper, or keys it in at home on the laptop, the office cannot see yesterday’s gauges without calling him. Wells slip for weeks before anyone spots the trend, and you cannot prove the visit happened.
Greasebook, TinyPumper’s sister app, covers those wells. The pumper logs gauges, pressures and comments on the phone he already carries while he stands at the well, geofencing confirms he was on the lease, and TinyPumper readings show up on the same screen. Innotek’s Encompass shows readings and trends, but its public pages say nothing about run tickets, allocation or state production reports.
When Is TinyPumper the Better Fit Than Innotek?
- You need to watch tanks, pressures and runtime, and you do not need to switch the pump.
- You want your own crew to install it in 8 minutes with no wiring and no electrician.
- Your leases sit in dead zones. Satellite gives 100% continental US coverage.
- You want one flat rate per site, so adding a pressure sensor or a second tank does not add a monthly charge.
- You want sensor readings and pumper gauges in one place.
Producers running TinyPumper report cutting lease runs by 30 to 50 percent and catching failures days sooner. To see every option side by side, read our oilfield monitoring alternatives guide.
TinyPumper watches all three on one gateway. $349 a sensor, one-time setup, then one flat rate a month per site. 60-day money-back.
See TinyPumperWhen Is Innotek the Better Fit Than TinyPumper?
Here is the honest admission: TinyPumper watches, it does not control. It will not shut in a well or change a pump’s cycle. If you want to retime a pumping unit on a 3-barrel well from your truck, Innotek OverWatch does that and we do not. And if you need full control of a large instrumented facility, neither product is the answer.
TinyPumper at a Glance, as of November 2026
TinyPumper is Greasebook’s sister product. It gives 100% continental US coverage because we use satellite. Each gateway connects up to 8 sensors. Your team self-installs it in 8 minutes. Pricing is $349 a sensor, one-time setup, then one flat rate a month per site, unlimited sensors. Every order carries a 60-day money-back guarantee, and all equipment has lifetime replacement. Every well with a TinyPumper sensor gets free Greasebook.
Who Should Keep Innotek and Skip This Page
This page is not for producers whose main need is remote pump control, and it is not for producers who need full SCADA control. If you are still weighing gauges, look at our Tank Sentinel alternative and TankScan alternative pages, or go back to our roundup of monitoring alternatives.
Frequently Asked Questions About Innotek
What does Innotek do?
Innotek, Inc. builds cellular controllers and a web dashboard for small remote sites. Its OverWatch line runs pump timers and motor controls and watches tank levels, and its Encompass portal shows readings and alarms. Stripper wells are a main market, and the company also sells into rural water, irrigation and tower sites. It is not the Innotek pet collar brand.
Is Innotek a good buy?
For a stripper well where you want to start, stop or retime the pump from your phone, Innotek is a fair choice, because TinyPumper does not control equipment. If you mostly need to watch tanks, pressures and engine runtime on leases with no power, a wireless monitor with no wiring is the simpler choice. If you meant the stock, see the share price question below.
Is LG Innotek part of LG?
Yes. LG Innotek is an electronics parts maker in the LG group of companies. It has nothing to do with Innotek, Inc., the company that sells OverWatch controllers to stripper well operators, or with the Innotek pet collar brand. If you searched Innotek because of oilfield tank or pump monitoring, this page is about the oilfield company.
What is the current share price of InnoTek?
We do not track it. InnoTek Ltd is listed on the Singapore Exchange under the ticker INTK, so check SGX or your broker for a live price. That company is a separate business from Innotek, Inc., which sells pump and tank controllers to stripper well operators in the US. This page compares the oilfield product, not the stock.
Does TinyPumper control pumps like Innotek OverWatch?
No. TinyPumper watches; it does not control. It reads tank levels by radar, wellhead, flowline and injection pressures, and engine or compressor runtime, then alerts you when a reading crosses your threshold. It will not shut in a well or retime a pumping unit. If remote pump control is the whole reason you are shopping, Innotek or SCADA is the better fit.
Does TinyPumper need power or wiring at the site?
No. The gateway runs on solar and the sensors talk to it over Bluetooth, so nothing gets wired to the tank or the wellhead. There is no trench to dig and no electrician to schedule. Your team self-installs it in 8 minutes, and readings reach your phone over satellite, which gives 100% continental US coverage.